首页 - 供求信息 - 天津市北闸口仪表机床厂

产品名称：天津市北闸口仪表机床厂-自动车床

隶属行业：机械及行业设备企业大黄页

隶属地区：天津企业 - 津南区

我要下单

供求信息

详细信息

TB—2025A/TB—1525A型单主轴、双尾轴走刀式自动车床是我厂系列产品之一，它具有结构紧凑、精度高、效率高灯特点，特别适合于仪表和五金零件的自动车削加工。该机床适用于大批量生产，具有如下特点：

Main usage and featufes

The single spindle-dual tail shaft feeding machine tool is automatic lathe TB-2025A/TB-1525Atype,It’s one of the senies of our factory’s products.IT has characterized by it’s compact construcyion,High precision,High efficiency etc.,Suitable for the automatic processing of instrument and metal parts.The machine is suitable quantity production.Its main features is as follow:

（1）主轴和刀架

主轴采用特殊钢经过热处理及精密加工研磨制成，配有五组刀具，配有微调螺丝使工件达到高精度。

MAIN SPINDLE＆TOOL RACK:

The main spindle is made by special steel which has been heat treatment and processing by ground precisely,This machine is equipped with 5 sets of tools and high precision can be achieved through the equipped micrometer.

（2）二轴装置

本轴装置采用电磁离合器，带动攻丝主轴，利用高速回转与机械主轴同方向之回转差而进行攻丝加工，二轴可摇动变换加工，铰孔，钻深孔，攻内外丝可同时一次加工完成。

TWO SHAFT DEVICE:

This adopts magnetic clutch to drive the tapping shaft,and tapping can be achieved by use of the revolution difference between main spindle and tapping shaft in the same direction.Reaming.Deep hole drilling and inside or outside tapping can be completed in a cycle by shaking to exchange both of the shafts.

（3）凸轮与凸轮轴

径向切削时使用板凸轮，轴向切削则使用鐘型凸轮，凸轮轴可在中间轴头处分为二，方便更好凸轮，故组合变换可在短时间完成，效能高，可随需要用手摇旋转变换。

CAM ＆CAM SHAFT:

Plate cam is for a radial cutting,bell cam is for axial cutting.At the central journal,The cam shaft is divided into two protion Convenient and save much time to exchange cams.Also,Itcan be changed into by manual shaking rotating when necessary.

主要规格参数：Main Specifications:

型号	Model	TB-2025A			TB-1525A
刀具架数	Number of tool	5			5
尾轴数	Number of tailstock	2			2
最大加工直径	Max.dia processing	20mm			20mm
最大加工长度	Max.length of processing	30mm			30mm
车削圆度	Turning Rundness	5μm			5μm
钻孔最大直径	Max.Diameter of drilling	10mm			10mm
钻孔最大深度	Max.depth of drilling	30mm			30mm
攻丝最大直径	Max.diameter of tapping	Cu黄铜M10×1.25 Fe铁M8×1.0			Cu黄铜M10×1.25 Fe铁M8×1.0
主轴转速	Spindle speed	1830~6480r.p.m.			2370~7400r.p.m.
主轴转速级数	Number of spindle speeds	5 steps			5 steps
凸轮轴转速	Cam shaft speed	1.1~28r.p.m.			1.5~37.5r.p.m.
凸轮轴回转速度级数	Control of cam shaft speeds		25steps		25steps
主轴马达	Main motor	1.5kw			1.5kw
切削油泵电机	Coolant pump motor	1/4HP			1/4HP
油槽	Oil tank	40L			40L
主轴中心高度	Height from floor to spindle center			1080mm		1080mm
机床重量	Weight	850kg			850kg
车床尺寸(长×宽×高)	Lathe dimensions(L×W×H)	1500×750×1450mm			1500×750×1450mm
包装箱尺寸(长×宽×高)	Measurement(L×W×H)	1980×920×1760mm			1980×920×1760mm

标准附件 STANDARD ACCESSORIES

送料架	Feeding support	1(set)
防油盖	Oil splash-prevention	1(set)
弹簧卡头	Collet chuck	1(pc)
调节工具	Adjust tools	1(set)
工具箱	Tools box	1(pc)
切削冷却装置	Cooling equipment	1(set)
攻丝外套	Tapping jacket	1(pc)Φ20, Φ25