产品名称:天津市北闸口仪表机床厂-数控车床
隶属行业:机械及行业设备企业大黄页
隶属地区:天津企业 - 津南区
详细信息
供货商类型 | 其它 |
---|
CKX6150型数控车床适用于内外径、端面、锥面、弧面和螺纹零件高效精密加工,刀具安装采用8-12工位液压转塔刀架形式)(或选装电动转塔刀架),机床采用KND1000TⅡ型数控系统,按客户需要可选配不同的数控系统。主轴采用交流变频调速,可实现恒线速切削。
该机床采用45°斜置床身,刚性好,易排屑,便于观察。X、Z向导轨采用HTPM超大尺寸预加负荷直线滚动导轨,X、Z向丝杠采用汉江丝杠厂生产的国内最高级别2级精度超大直径滚珠丝杠副,该丝杠为中置式(装于床身中间),消除了扭矩,提高了传动的稳定性。该机床配有液压站,采用φ200液压中空卡盘夹紧方式。采用液压尾座:尾座套筒能快进、慢进、点动;该操作和加工零件带来极大的方便和安全。机床采用整体模块铸铁,经时效处理不变形,机床还采用了超宽床身,加强了支撑刚性,提高了车削的稳定性,因此该机床可进行强力切削。床身丝杠采用了前置直板式防护(非折叠式),提高了防水、防屑能力。机床导轨和丝杠均采用自动周期润滑。
主轴轴承采用由轴承厂组配的预加负荷的精密角接触球前轴承和双列圆柱滚子轴承,可得到高精度、高刚度、高承载能力、高转速的优化组合。机床采用全封闭防护,结构紧凑,占地面积小。
Main usage and features
CK6150 type CNC controlled lathe is mainly tp turning inner and outer cylindrical surface,end surface,taper surtace,arc surface and thread of shaftets.with highly efficient and accurate working.The Tools can be fitted 8- 12 position hydranlic turret head type(or fix motor turret head type by customers election), The CNC control is adopted with KND1000TⅡ system and be fitted with different CNC system according to Customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion,it realized permanent turning.
The lathe adopts 45°inclined bed.X and Z axes guideways are adopted HTPM oversize with pre-loading lineal and rolling guideways.X and Z axes leading screws are adopted biger diameter with 2 gradation accuracy ball screws, The accuracy of leading screws screws is most higt grade in domestic by made in HANJIANG screw&guide works.The screw is in center type(It is fitted in center of bed ),torgue was eliminated,transmissive stability was raised.The machine tool has been fitted hydraulic tank,It can be adopted Φ200mm hydraulic chuck with though hole type,The lathe adopts hydraulic tailstock,The tailstock sleeve can very quick move or slow move and slight move.Therefore,It made operation and working brought much convenient and safety,The lathe is adopted whole modular cast,It is treated aging,so that cats is not deformation.The lathe is adopted wider bed,with this result supporting rigidity increase,and raise turning stability,Therefore the lathe can be strong turning,The leading screw of bed was protect with straight plate(non-folding protective shield),as a result protection of water and protection of chips are raised.The machine tool guideway and the screws are both lubricated periodically.
The spindle supporter is adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),and with double cylindrical roll bearing.It can be acquire to optimige compound with high precision,High riidith,high load bearing ability and high turning speed.The machine tool is protected entirely closed,compact construction,occupy a small area.
主要规格参数:Main Specifications:
一、机床加工范围 |
Lathe working range |
|
||||||
床身上回转直径 |
Max.swing dia.over bed |
φ200mm |
||||||
刀板底座上回转直径 |
Swing over cross slide |
φ400mm |
||||||
最大车削长度 |
Max.turning length |
680mm |
||||||
卡盘夹持时最大车削长度 |
Chuck clamping max.turning length |
580mm |
||||||
X向行程 |
X—Axis stroke |
320mm |
||||||
Z向行程 |
Z—Axis stroke |
700mm |
||||||
快速移动 |
Rapid transit |
X向12;Z向18m/min |
||||||
二、主轴 |
Spindle |
|
||||||
主轴端部形式 |
Spindle nose flange |
A2—5 |
||||||
主轴孔径 |
Spindle bore |
φ63mm |
||||||
主轴转速 |
Spindle speeds |
70—3000r.p.m. |
||||||
主轴内锥孔 |
Taper bore of spindle |
1:50 |
||||||
弹簧夹头最大直径 |
Max.range of collet chuck |
φ52mm |
||||||
三、刀具系统 |
Tool system |
|
||||||
刀具截面 |
Tool cross section |
25×25mm |
||||||
刀排工位数 |
Station No.of gang tool |
8-12 |
||||||
四、电机功率 |
Motor power |
|
||||||
主电机功率 |
Spindle motor power |
5.5kw |
||||||
X向伺服电机 |
X—axis servo motor |
1.5kw(6N.M) |
||||||
Z向伺服电机 |
Z—axis servo motor |
1.5kw(6N.M) |
||||||
冷却泵电机 |
Coolant pump motor |
250w |
||||||
液压泵电机 |
Hydraulic pressure pump motor |
1.5kw |
||||||
五、位置精度 |
Position Accuracy |
|
||||||
定位精度 |
Position accuracy |
X向0.003mm Z向0.005mm |
||||||
重复定位精度 |
Repetitive position accuracy |
X向0.002mm Z向0.003mm |
||||||
六、加工精度 |
Machining precision |
|
||||||
圆度 |
Roundness |
0.002mm |
||||||
圆柱度 |
Cylindricity |
0.005mm |
||||||
随机附件 |
Accessories |
1.液压站(已装在机床上) |
Hydranlic tand (has fixer in the lathe) |
1套 |
||||
2.切削冷却装置 |
Coolant device |
1套 |
||||||
3.切削液蓄水装置 |
Water tank of save cutting fluid |
|||||||
4.切削箱 |
Chip tank |
|||||||
5.随机工具 |
Accessorial tool |
1套 |
||||||
6.中空卡盘及专用拉杆(已装在车床上) |
Chuck with through hole and special pull rod (has fixed in the lathe) |
1套 |
||||||
7、8工位砖塔刀架(已装在车床上) |
8position turret head(has fixd in the lathe) |
各1件 |
||||||
七、数控系统主要功能(可选三菱E60、广州数控GSK980TD或西门子等数控系统) Main Funtion of CNC (may select MITSUBISHI E60,GUANGZHOU GSK980TD or Siemens CNC sstem |
||||||||
最小设定单位 |
Least input increment |
X:0.0005,Z:0.001mm |
||||||
控制轴数 |
Axes controlled |
2 |
||||||
联动轴数 |
Axes simultaneously moved |
2 |
||||||
可直线插补、圆弧插补 |
Lineal and arc interpolation |
|
||||||
螺纹切削—公、英制螺纹、锥螺纹 Screw truning—Metric/whitworth and taper threads |
0.01—100mm |
|||||||
刀具长偏置、刀具长补偿 Tool with long angular arrangement and long offset |
||||||||
坐标系设定—自动坐标系、机械坐标系、工作坐标系、局部坐标系 Definition of coordination system—Automatic,machine,running,partly |
||||||||
八、其他 Others |
||||||||
机床毛重 |
Gorss weight of machine |
3450kg |
||||||
机床净重 |
Net weight |
3150kg |
||||||
包装箱尺寸(长×宽×高) |
Size of packing(L×W×H) |
2650×1630×2030mm |
||||||
选择附件 |
Optional accessories |
1、电动砖塔刀架 |
Motor turret head compound |
2、中实卡盘 |
Chuck without thought hole |
||
3、自动排屑器 |
Automatic remove chip device |