产品名称:天津市北闸口仪表机床厂-数控车床
产品型号:CK6136T-A车床
产品产地:天津企业 - 津南区
详细信息
供货商类型 | 其它 |
---|
CK6136T/A车床
该机床只要使用于内外圆、端面、锥面、弧面、螺纹、盘类和轴类零件的高效精密加工。刀具安装方式采用四工位电动刀架加三工位排式刀座(或采用排式刀座形式可安装6-8把刀)。
机床采用广州数控GSK980TA/TD数控系统,按客户需要选用不同的数控系统,主轴采用交流变频调速,可实现恒线速切削。该机床采用滑动贴塑(TSF)导轨,耐磨性好,接触刚性好,运动灵活,精度稳定,丝杠为中置式(安装于床身中间),消除了扭矩,提高了传动的稳定性。机床采用整体模块铸铁,经时效处理不变形,机床采用了超宽床身加强了支撑刚性,增加了车削的稳定性,因此该机床可进行强力切削。床身丝杠采用了前置直板式防护(非折叠式),提高了防水、防屑能力。机床导轨丝杠均采用自动周期润滑。
主轴轴承采用由轴承厂组配的预加符合的精密角接触球轴承和双列圆柱滚子轴承,可得到高精度、高刚度、高承载能力、高转速的优化组合。
该机床配有液压站,采用液压弹簧卡头加紧方式(也可选装φ160中空卡盘),配有手动尾座也可选装液压尾座),也可选装重锺式或液压自动送料架,便于自动化生产,使该机床适应和针对性更强。该机床结构紧凑、占地面积小、使用方便。
Main usage and features
The machine tool is mainly used to turning inner and outer cylindrical surface,end surface,taper surtace,arcsurface and thread of shaft disk and shaft type ets.with highly efficient and accurate working.The tools is adopted 4 position motor tool rest and 3 position gang-type tool apron(or tools is adopted gang-type tool apron, It can be fitted 6-8).
The CNC control is adopted with GUANGZHOU CNC 980TA/TD system and be fitted with different CNC system according to customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion,It realized permanent speed turning.The machine tool is adopted sliding guideway with a film of pasted plastic(TSF),the film is with good wear resistance,good contact rigidity,quick movement and steady accuracy.The leading screw is in center type(It is fitted center of bed),torgue was eliminated, transmissive stability was raised,The lathe is adopted whole modular cast,It is treated aging,so that cast is not deformation. The lathe is with wider bed,with this result supporting rigidity increase,and raise turning stability,Therefore the lathe can be strong turning.The leading screw of bed was protect with straight plat(non-folding protectioive shield),as a result protection of water and protection of chips was raised.The machine tool guideway and ball leading screws are bith lubricated periodically.
The spindle supporter is adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),and with double cylindrical roll bearing.It can be acquire to optimige compound with high precision,High riidith,high load bearing ability and high turning speed.
The machine tool has been fitted hydraulic tank,It is adopted hydraulic-clamping coller chuck device(It can be fitted Φ160mm hydraulic chuck with though hole too), It is provided with hand tailstock(It can be fitted hydraulic tailstock too),and can be fitted in the form of weight or hydraulic automatic feeding supprot device too,and so it adapts process automation,its adaptable and directionality are more than even increase. The machine tool is compact construction, occupy small area,convenient for operation.
主要规格参数:Main Specifications:
一、机床加工范围 |
Lathe working range |
|
||||||
床身上回转直径 |
Max.swing dia.over bed |
φ380mm |
||||||
刀架上最大回转直径 |
Max.swing dia.over carriage |
φ180mm |
||||||
工件最大长度 |
Max.lenght of workpiece |
300mm |
||||||
顶尖距 |
Max.distance between centers |
450mm |
||||||
X向行程 |
X—Axis stroke |
600mm |
||||||
Z向行程 |
Z—Axis stroke |
500mm |
||||||
快速移动 |
Rapid transit |
12~15m/min |
||||||
二、主轴 |
Spindle |
|
||||||
主轴端部形式 |
Spindle nose flange |
A2—5 |
||||||
主轴孔径 |
Spindle bore |
φ45mm |
||||||
主轴转速 |
Spindle speeds |
100-3000(50-5000)r.p.m. |
||||||
主轴内锥孔 |
Taper bore of spindle |
1:50 |
||||||
弹簧夹头最大直径 |
Max.range of collet chuck |
φ35mm |
||||||
三、刀具系统 |
Tool system |
|
||||||
刀具截面 |
Tool cross section |
20×20mm |
||||||
四、尾座 |
Tailstock |
|
||||||
尾座顶尖套筒锥孔 |
Taper of bore in tailstock center sleeve |
Morse 4 |
||||||
尾座顶尖套筒最大行程 |
Max.travel of tailstack center sleeve |
150mm |
||||||
五、电机功率 |
Motor power |
|
||||||
主电机功率 |
Spindle motor power |
4kw |
||||||
液压泵电机 |
Hydraulic pressure pump motor |
1.5kw |
||||||
冷却泵电机功率 |
Coolant pump motor |
120(250)w |
||||||
六、进给 |
Feed |
|
||||||
X向伺服电机 |
X-axis serve motor |
1.0kw(4N.M) |
||||||
Z向伺服电机 |
Z-axis serve motor |
1.5kw(6N.M) |
||||||
七、位置精度 |
Position Accuracy |
|
||||||
定位精度 |
Position accuracy |
X向0.006mm Z向0.008mm |
||||||
重复定位精度 |
Repetitive position accuracy |
X向0.005mm Z向0.007mm |
||||||
八、加工精度 |
Machining precision |
|
||||||
圆度 |
Roundness |
0.002mm |
||||||
圆柱度 |
Cylindricity |
0.005mm |
||||||
随机附件 |
Accessories |
1.液压站(已装在机床上) |
Hydranlic tand (has fixer in the lathe) |
1套 |
||||
2.切削冷却装置 |
Coolant device |
1套 |
||||||
3.切削液蓄水装置 |
Water tank of save cutting fluid |
|||||||
4.切削箱 |
Chip tank |
|||||||
5.床头顶尖 |
Headstock center |
1个 |
||||||
6.尾座顶尖 |
Tailstock center |
1个 |
||||||
7.拨盘 |
Driver chuck |
1个 |
||||||
8. 随机工具 |
Accessorial tool |
1套 |
||||||
9.中空卡盘(φ160;孔φ55) |
Chuck with through hole(φ160,holeφ55) |
1件 |
||||||
10.刀座 |
Tool apron |
3件 |
||||||
九、数控系统主要功能(GSK980TA)Main Funtion of CNC control (GSK980TA) |
||||||||
最小设定单位 |
Least input increment |
X:0.0005,Z:0.001mm |
||||||
控制轴数 |
Axes controlled |
2 |
||||||
联动轴数 |
Axes simultaneously moved |
2 |
||||||
可直线插补、圆弧插补 |
Lineal and arc interpolation |
|
||||||
螺纹切削—公、英制螺纹、锥螺纹 Screw truning—Metric/whitworth and taper threads |
0.01—12mm |
|||||||
刀具长偏置、刀具长补偿 Tool with long angular arrangement and long offset |
||||||||
坐标系设定—自动坐标系、机械坐标系、工作坐标系、局部坐标系 Definition of coordination system—Automatic,machine,running,partly |
||||||||
十、其他 Others |
||||||||
机床毛重 |
Gorss weight of machine |
2.2T |
||||||
机床净重 |
Net weight |
2.02T |
||||||
包装箱尺寸(长×宽×高) |
Size of packing(L×W×H) |
2110×1470×2000mm |
||||||
选择附件 |
Optional accessoriies |
1、专用夹具及弹簧夹头、专用拉杆 |
Special apparatus and collet chuck special pull rod |
|
2、中实卡盘 |
Chuck without thought hole |
|||
3、重锤式自动送料架 |
Feeding support device in the form of weight |
|||
4、液压自动送料架 |
Hydraulic automatic feeding support device |
|||
5、警示灯 |
Alarm lights |